Flextronics Product Center
Yancheng Flextronics Electric Heating Equipment Technology Co., Ltd. Contact: Mr. Jiang Tel: 0515-83063266
Address: Chaoyang Road, Yifeng Industrial Park, Dazonghu Town, Yandu District, Yancheng City, Jiangsu Province Post Code: 224000
Your current location: Home> Products
- Electric tube flange
- Product introduction
Service Hotline: 18905103458
- Flextronics flange heating tubes are welded on the flange by multiple heating tubes to centrally heat them. It is mainly used for heating in open and closed solution tanks and circulation systems. It has the following advantages: the surface power is large, and the surface load of air heating is 2 to 4 times.
The flange electric heating pipe is highly dense and compact. Because the whole is short and dense, it has good stability and no bracket is required for installation. Most of the combined types use argon arc welding to connect the electric heating pipe to the flange, and can also use the form of a fastening device, that is, each electric heating pipe is welded with a fastener. Then lock the flange cover with a nut. The pipe and the fastener are welded by argon arc, and never leak. Fastener seal adopts scientific technology. Single replacement is extremely convenient, greatly saving future maintenance costs.
Choose imported and domestic quality materials. Scientific production technology and strict quality management ensure superior electrical performance of electric heating pipes.
Overview and working principle: Flange electric heating tube (also known as plug-in electric heater): It is a U-shaped tubular electric heating element, which is assembled on the flange cover according to the design specifications of different heating media, according to the power configuration requirements, and inserted into the material to be heated. , A large amount of heat emitted by the heating element is transmitted to the heated medium to increase the temperature of the medium, which meets the required process requirements. When the medium temperature reaches the set value required by the process, the control system adjusts the output power of the electric heater after PID calculation according to the temperature sensor signal, and achieves temperature control of the resistive load of the heating element. Make the temperature of the medium uniform to meet the required requirements; when the heating element is over-temperature or low liquid level, the interlocking protection device of the heating element immediately cuts off the heating power to prevent the heating element from burning out and extends the service life.
- Previous: Single head electric heating tube